A&D TM-2441 - Page 72

54
Example 2 Automatic measurement
The start time of the automated measurement = 7:00,
The operation time of the automated measurement = OFF.
When the AUTO switch is set to "ON", A-BPM is started at 7:00.
A-BPM is continued according to the start time and interval of each
section until the AUTO switch is set to "OFF".
Example 3 Automatic measurement
The start time of the automated measurement = OFF,
The operation time of the automated measurement = 26 hours.
When the AUTO switch is set to "ON", A-BPM continues
according to the start time and interval of each section for 26
hours.
AUTO switch to "ON"
Blood pressure measurement
Time
Section 1
After 26 hours
Section 2
Not measured
AUTO switch to "ON"
Blood pressure measurement Not measured
Time
Section 1
AUTO switch to "OFF"
Section 2
7:00