AAON SS1079 User Manual

VCC-X Controller Code: SS1079 Version 1.0 & up
VAV/Zone Controller Code: SS1001, SS1005, SS1025
Requires Service Tool SD Code: SS1063
Requires System Manager SD Code: SS1068 Version 1.11
VCC-X Controller
Operator Interface SD
Technical Guide

AAON SS1079 Specifications

General

Brand	AAON
Model	SS1079
Category	Controller
Language	English

Summary

SYSTEM CONNECTION

Modular Service Tool SD

Details the connection, features, and specifications of the Modular Service Tool.

Modular System Manager SD

Covers the connection, features, and specifications of the Modular System Manager.

MODULAR SERVICE TOOL SD

Service Tool Keys and Interface

Describes keypad functions, mode selection, and display elements.

Alarm and Override Search Procedures

Details how to search for alarms and overrides on the system.

MODULAR SYSTEM MANAGER SD

System Manager Keys and Interface

Describes keypad functions, mode selection, and display elements.

Passcode Management

Details the process for changing user access passcodes.

Loop Search and System Alarm Search

Covers performing loop searches and system-wide alarm searches.

Unit Alarm and Override Search

VCC-X CONFIGURATION

Configuration Screen Index

Provides an index to all available VCC-X configuration screens.

Initial Setup and Module Configuration

Covers initial setup screens, sensor scaling, and module installations.

HVAC Mode and Sensor Configurations

Control Parameters and Fan Settings

Pressure and Economizer Configurations

Heat, Cool, and Delay Configurations

Economizer, Control Loop, and Building Pressure Settings

Heat Pump, Dehumidification, and Airflow Settings

Humidity, Reheat, and Schedule Settings

Airflow Duct Size and Warm-Up Settings

Daylight Savings, Broadcast, and Shutdown Settings

Stage Delays and Broadcast Configurations

Heat Pump, Bypass, and Cool-Down Configurations

Relay Configuration Options

Describes the configuration options for VCC-X, EM1, and E-BUS relays.

VCC-X SETPOINTS

Setpoint Screens Index

Provides an index to all available VCC-X setpoint screens.

General Procedures and Occupied Setpoints

Temperature, Deadband, and Sensor Adjustments

Dewpoint, Humidity, and Pressure Setpoints

VFD Speed and Reset Source Setpoints

Supply Air and Heat Reset Setpoints

Stage Control and Head Pressure Setpoints

Economizer and Damper Position Setpoints

Airflow and CO₂ Setpoints

Building Pressure and OAT Lockout Setpoints

Supply Air Cutoffs and Preheat Setpoints

Defrost, Warm-Up, and Integral Constant Setpoints

Bypass Damper and Superheat Setpoints

Sensor Calibration Procedures

Temperature Sensor Calibration

VCC-X STATUS

Status Screens Index

Provides an index to all available VCC-X status screens.

General Procedures and Basic Status

Output and Enabled Status Information

Module and Temperature Status Details

PREHEAT-X Status and Outdoor Conditions

Economizer and CO₂ Status Information

Building Pressure and Duct Static Status

Damper, Relay, and Reset Voltage Status

EM1 and Expansion Module Relay Status

Alarm Status Screens

Displays alarm status and lists active alarms.

RSM CONFIGURATION

RSM Configuration Overview and Instructions

Introduces RSM configuration and provides instructions for tools.

RSMV Configuration Screens

RSMD Configuration Screens

RSM STATUS

RSM-VFD & HP Status Screens Overview

Introduces the index for VFD & HP status screens.

RSM VFD & HP Status Details

RSM-DIGITAL Status Screens Overview

Introduces the index for RSM DIGITAL status screens.

RSM DIGITAL Status Details

VAV/ZONE CONFIGURATION

VAV/Zone Configuration Overview and Instructions

Introduces VAV/Zone configuration and provides instructions for tools.

Box Configuration and Damper Operation

Voting Zone and Airflow Settings

Fan, Override, and HVAC Unit Loop Settings

VAV/ZONE SETPOINT SCREENS

Setpoint Screens Overview and Procedures

Introduces VAV/Zone setpoint screens and general procedures.

Occupied and Unoccupied Setpoints

AHU Heat Call and Damper Airflow Setpoints

Night Min, Deadband, and Alarm Offset Setpoints

Delay, Schedule, and Sensor Calibration Setpoints

VAV/ZONE STATUS

VAV/Zone Status Screens Overview

Introduces the index of VAV/Zone status screens.

Mode of Operation and Temperature Status

Damper, Fan, and Reheat Status

Alarm Status Information

Details alarm status and lists active alarms.

VAV/ZONE DAMPER FORCE

VAV/Zone Damper Force Modes

Explains the different damper force modes for testing and balancing.

MINILINK PD CONFIGURATION

MiniLink PD Configuration Screens Overview

Introduces the index of MiniLink PD configuration screens.

System Type and Mode Settings

Optimal Start and Alarm Polling Configurations

MiniLink PD Status Information

TROUBLESHOOTING

VCC-X Outputs Force Procedure

Explains how to force outputs for testing and troubleshooting using the Modular Service Tool.

Analog Output Force Settings

Details force settings for analog outputs like fans, economizers, and modulating signals.

Additional Analog Output Force Settings

Covers force settings for exhaust fan, mod condenser, and modulating cool outputs.

APPENDIX A - SAVE, LOAD, COPY SETPOINTS

Saving and Copying Setpoints

Copying and Restoring Setpoints

APPENDIX B - UPDATING THE SD CARD

SD Memory Card Update Procedures

Provides instructions for downloading and updating the SD memory card with new software.

Updating Your SD Memory Card

APPENDIX C - UPDATING CONTROLLERS & MODULES

Updating Controller Software with Modular Service Tool

Explains how to update controller software using the Modular Service Tool.

Updating E-BUS Module Software