Installing MX-ONE
Figure 42 Mounting the Lower Air Plate
1 Place subrack B in an upside-down position on a steady surface.
2 Insert the edge of the lower air plate (E) in the slot at the rear side of the
subrack, Page 58 .
3 Lower the air plate to level it with the screw holes in the subrack, as
demonstrated by the dotted line, Page 58 .
4 Fasten the air plate to the subrack from both sides using two screws (F),
Page 58 .
Parts from this mounting set are used when installing the fan unit, leave the
remaining parts at hand.
58
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...
