Hardware Installation
4.8.2 Installing Subrack B
Figure 43 Installing Subrack B
The lower air plate is only mounted in subrack B (lower subrack), Section
4.8.1 on page 57 . In subrack A (upper subrack), front and rear air plates are
installed instead.
1 Mount four captive nuts (A) ( Section 4.4 on page 41 ) according to the
number positions shown, Page 59
2 Use the screws (C) to fasten the subrack to the captive nuts in the cabinet.
It is very important to use the correct holes in the subrack brackets. For
the correct holes, Page 59
59
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...