Page 182 01/2007 AMT/PTD/PBX/0020/2/4/EN
10.7 Declare the cells
The MMC XCELLU, Object "Cells", is used to declare the cells.
A cell must be a group of base stations with adjacent coverage. The maximum number of base
stations per cell is 8 (you are advised to configure only 6, with a view to expansion in order to
increase traffic flow). It may be necessary to declare several cells. The "Registration zone" is
always 0. In multisite configurations, if the coverage areas overlap, you are advised to select
different cell numbers for each of the sites.
CORDLESS TOPOLOGY
Object=Cells Action=Display
---------------------------------------------------------------------------
Type of cell=DECT Cell=3..
---------------------------------------------------------------------------
Registration zone ---> =0.
Operation performed
To Next Page
Loading...
Need help?
General
