AMT/PTD/PBX/0020/2/4/EN 01/2007 Page 189
11.3 Programming the DECT parameters
On NeXspan C/S/L, menu 1.8.1.2 (Single-company management) or 1.9.1.2 (Multi-company
management) is used to program the DECT parameters:
The first four fields and the last two are described in the section DECT parameters to the page
164. The following parameters are specific to a multisite configuration and are used to define the
list of sites on which the mobile terminals will be registered:
• SEARCH MOBILES NOT REGISTERED: fill in the field "OR IN THE LIST" with a broadcast
list (broadcast list A is the default).
Program the menu 3.7.2.5 with a list of the remote sites and centres.
DECT PARAMETERS
PARI VALUE 0 999999999.
RANDOM VAL RECORDED 86........
RS VAL RECORDED 66........
DIR. BEGINNING ASSIGNED TO PLL 999.
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE NO
OR IN ANOTHER SITE ........
OR IN THE LOCAL CENTER NO
OR IN ANOTHER CENTER ........
OR IN THE LIST BROADCAST A
CLOCK SYNCHRON. PRIORITY MASTER
CURRENT STATE TRANSMITTER NETWK CLK
DEFINITION OF BROADCAST LIST A
ITEM 1: CENTER NAME 01-CENTER 1
OR SITE NAME ........
OR OTHER LIST ........
ITEM 2: CENTER NAME 02-CENTER 2
OR SITE NAME ........
OR OTHER LIST ........
ITEM 3: CENTER NAME 03-CENTER 3
OR SITE NAME ........
OR OTHER LIST ........
ITEM 4: CENTER NAME ........
SITE NAME ........
OR OTHER LIST ........
To Next Page
Loading...
Need help?
General
