AMT/PTD/PBX/0020/2/4/EN 01/2007 Page 9
Chapter 1 - Introduction
1.1 Object
This document describes how to install and put in service the integrated DECT service for the
following PBXs:
• NeXspan C/S/L/D
• NeXspan 50
• NeXspan 500
This document is divided into 10 chapters:
Chapter 1: Introduction
This chapter gives the contents of the document, a list of the abbreviations used and the
definition of concepts specific to the DECT. Should you require more detailed information, a
"Reference Documents" section gives the references and titles of other manuals you can
consult.
Chapter 2: Description
This chapter describes the physical equipment making up the integrated DECT system (base
stations and mobiles).
Chapter 3: Deployment principles
This chapter describes the deployment method for a given installation, i.e. definition of the radio
coverage, the number of base stations and the dimensioning of the system.
Chapter 4: Implementation of hardware on NeXspan C/S/L/D
This chapter describes the interface cards to be used in an NeXspan C/S/L and the wiring layout
between the system and the DECT base stations.
Chapter 5: Implementation of hardware on NeXspan 50
This chapter describes the interface cards to be used in a NeXspan 50 and the wiring layout
between the NeXspan 50 and the DECT base stations.
Chapter 6: Implementation of hardware on NeXspan 500
This chapter describes the interface cards to be used in a NeXspan 500 and the wiring layout
between the NeXspan 500 and the DECT base stations.
Chapter 7: Multi-site synchronization
This chapter describes the principles and specific features of synchronization for multi-site
networks.
To Next Page
Loading...
Need help?
General
