AMT/PTD/PBX/0020/2/4/EN 01/2007 Page 195
Another site is declared not priority Master:
For the other sites the programming is as follows:
The field "MASTER SITE FAR FROM" is used to compensate the DECT clock transmission time
from one site to another. Adjustment is made in 100 m steps on the slave PBXs, with the formula
described in the section "synchronization with UCT-L/UCT-S" applied. The minimum value for
the "adjustment" distance is "<100 meters", and the maximum value "> 2000 meters".
DECT PARAMETERS
PARI VALUE 0 999999999.
RANDOM VAL RECORDED 86........
RS VAL RECORDED 66........
DIR. BEGINNING ASSIGNED TO PLL 999.
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE NO
OR IN ANOTHER SITE ........
OR IN THE LOCAL CENTER NO
OR IN ANOTHER CENTER ........
OR IN THE LIST BROADCAST A
CLOCK SYNCHRON. NOT PRIORITY MASTER
CURRENT STATE RECEIVER
DECT PARAMETERS
PARI VALUE 0 999999999.
RANDOM VAL RECORDED 86........
RS VAL RECORDED 66........
DIR. BEGINNING ASSIGNED TO PLL 999.
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE NO
OR IN ANOTHER SITE ........
OR IN THE LOCAL CENTER NO
OR IN ANOTHER CENTER ........
OR IN THE LIST BROADCAST A
CLOCK SYNCHRON. SLAVE
MASTER SITE FAR FROM < 100 METERS
CURRENT STATE RECEIVER
To Next Page
Loading...