34 ACH580 Installation, Operation and Maintenance Manual
ACH580-01 Installation
WARNING! To avoid danger or damage to the drive on IT systems and corner
grounded TN systems, see section Checking the compatibility with IT (ungrounded)
and corner-grounded TN systems (North America) on page 17.
Note: UDC+ and UDC- terminals are used for external brake chopper units.
Power wiring torque table
Frame size
R4
lb-ft N•m
T1/U, T2/V, T3/W 3.0 4.0
L1, L2, L3 3.0 4.0
UDC+ and UDC- 3.0 4.0
PE Ground 2.1 2.9
R4
Typical Type 1
6
5
7
Relay Outputs
Analog Inputs
and Outputs
Digital Inputs
Panel Connector
1
1
7
Option Mounting
EMC
VAR
To Next Page
Loading...
