EasyManua.ls Logo

ABB ACS880 PCP - Encoder Module Settings

ABB ACS880 PCP
494 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters 327
DIO1 Digital input/output DIO1 (11 .02 DIO delayed status, bit 0). 10
DIO2 Digital input/output DIO2 (11 .02 DIO delayed status, bit 1). 11
Other [bit] Source selection (see Terms and abbreviations on
page 101).
-
91
91 Encoder module
settings
Configuration of encoder interface modules.
91.01 FEN DI status Displays the status of the digital inputs of FEN-xx encoder
interface modules.
This parameter is read-only.
-
0000 0000b …
0011 0011b
Status word of digital inputs on FEN-xx modules. 1 = 1
91.02 Module 1 status Displays the type of the interface module found in the
location specified by parameter 91.12 Module 1 location.
This parameter is read-only.
-
No option No module detected in the specified slot. 0
No communication A module has been detected but cannot be communicated
with.
1
Unknown The module type is unknown. 2
FEN-01 An FEN-01 module has been detected and is active. 16
FEN-11 An FEN-11 module has been detected and is active. 17
FEN-21 An FEN-21 module has been detected and is active. 18
FEN-31 An FEN-31 module has been detected and is active. 21
FSE-31 An FSE-31 module has been detected and is active. 25
91.03 Module 2 status Displays the type of the interface module found in the
location specified by parameter 91.14 Module 2 location.
For the indications, see parameter 91.02 Module 1 status.
This parameter is read-only.
-
91.04 Module 1
temperature
Displays the temperature measured through the sensor
input of interface module 1. The unit is selected by
parameter 96.16 Unit selection.
Note: With a PTC sensor, the unit is ohms.
This parameter is read-only.
-
0…1000 °C, °F or
ohm
Temperature measured through interface module 1. -
No. Name/Value Description Def/
FbEq16
Bit Name Information
0 DI1 /module 1 DI1 of interface module 1 (see parameters 91.11 and 91.12)
1 DI2 /module 1 DI2 of interface module 1 (see parameters 91.11 and 91.12)
2…3 Reserved
4 DI1 /module 2 DI1 of interface module 2 (see parameters 91.13 and 91.14)
5 DI2 /module 2 DI2 of interface module 2 (see parameters 91.13 and 91.14)
6…15 Reserved

Table of Contents

Related product manuals