EasyManua.ls Logo

ABB ACS880 PCP - Page 448

ABB ACS880 PCP
494 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
448 Fieldbus control through the embedded fieldbus interface (EFB)
8 JOGGING_1 1 Accelerate to jogging 1 reference.
Notes:
Bits 4…6 must be 0.
See also section Jogging (page 69).
0 Jogging 1 disabled.
9 JOGGING_2 1 Accelerate to jogging 2 reference.
See notes at bit 8.
0 Jogging 2 disabled.
10 REMOTE_
CMD
1 Fieldbus control enabled.
0 Control Word <> 0 or Reference <> 0: Retain last Control
Word and Reference.
Control Word = 0 and Reference = 0: Fieldbus control
enabled. Reference and deceleration/acceleration ramp
are locked.
11 EXT_CTRL_
LOC
1 Select External Control Location EXT2. Effective if the
control location is parameterized to be selected from the
fieldbus.
0 Select External Control Location EXT1. Effective if the
control location is parameterized to be selected from the
fieldbus.
12…15 Reserved
Bit Name Value STATE/Description

Table of Contents

Related product manuals