Setting date and time
207
1SVC 440 795 M0100
Selection of summer time start and end
The logic relay shows you the options for the DST change.
The standard setting is NONE for automatic DST changeover
(Tick at NONE).
X Select the required variant and press the OK button.
The rule for the European Union (EU) has been selected.
Summer time start and end, setting the rule
If you wish to enter your own date, it is important to know
what settings are possible.
The start and end of summer time is a complex calculation
procedure throughout the world. For this reason, the
standard rules for the EU, US, GB are provided in the logic
relay.
h
The start and end of summer time can only be set in STOP
mode.
NONE åÆ
RULE...
EU
GB æ
US
NONE Æ
RULE...
EU å
GB æ
US
To Next Page
Loading...
