EL3060 CONTINUOUS GAS ANALYZERS | OI/EL3060-EN REV. A 99
Configuring the language of the user interface
Uploading the language file to the gas analyzer
Prerequisites: The ECT software tool ("configurator") has been installed on
the computer and the current language files are stored in the folder
"Analyze IT" – "ECT" – "Languages".
1 Open the ECT software tool.
2 Click the command "Communication Properties…" in the "Options"
menu or click the icon
in the toolbar.
3 Enter either the network name (server name) or the IP address of the
gas analyzer in the "Communication Properties" dialog.
4 Close the dialog by clicking "OK".
To Next Page
Loading...
Need help?
General
