124 EtherNet/IP – Start-up
22 ODVA STOP
FUNCTION
Determines how the motor is to be stopped
when a stop command is received via
EtherNet/IP.
This parameter only applies to the ODVA
AC/DC drive profile.
0 =
Ramp
ACS355:
FB PAR 22
ACSM1:
FBA PAR22
ACS850/ACQ810:
FBA par22
ACS880/ACS580:
Stop function
0 = Ramp The motor decelerates along the active
deceleration ramp.
1 = Coast The motor comes to a stop by coasting.
No. Name/Value Description Default
To Next Page
Loading...
