ABB FENA-21 - Protocols

22 Introduction to the manual
 Protocols
The FENA adapter module is compatible with Ethernet standards
IEEE 802.3 and IEEE 802.3u.
This table shows the protocols supported by the FENA adapter
module from SW version 0.290 onwards.
This table specifies the clients/masters that are compatible with the
supported protocols.
Modbus/TCP
1)
EtherNet/IP™ PROFINET IO
FENA-01 xxx
FENA-11 xxx
FENA-21 xxx
1)
In addition to Modbus/TCP, FENA-01/-11/-21 supports Modbus over
UDP.
Protocol Compatible client/master
Modbus/TCP
1)
All Modbus/TCP clients that support:
• Modbus Application Protocol Specification v1.1b
• Modbus Messaging on TCP/IP Implementation Guide
v1.0b
EtherNet/IP All EtherNet/IP clients that support:
• The CIP Networks Library, Volume 1, Common
Industrial Protocol (CIP), Edition 3.0 May, 2006
• The CIP Networks Library, Volume 2, EtherNet/IP
Adaptation of CIP, Edition 1.2 May, 2006
• Recommended Functionality for EtherNet/IP Devices
Version 1.2, Feb., 2006
PROFINET IO All PROFINET IO masters that support:
• GSDML file version 2.20
• PROFINET IO protocol according IEC standards
61158 and 61784
• PROFINET-IO conformance class B