174 EtherNet/IP – Communication profiles
10 REMOTE_
CMD
1 Fieldbus control enabled.
0 Control word and reference not getting
through to the drive, except for CW bits
OFF1, OFF2 and OFF3.
11 EXT_CTRL_
LOC
1 Select External Control Location EXT2.
Effective if control location parameterized
to be selected from fieldbus.
0 Select External Control Location EXT1.
Effective if control location parameterized
to be selected from fieldbus.
12…
15
Reserved
Bit Name Value STATE/Description
To Next Page
Loading...
