Introduction to the manual 25
EtherNet/IP protocol
• EtherNet/IP – Start-up presents the steps to take during the
start-up of the drive with the adapter module and gives
examples of configuring the EtherNet/IP client.
• EtherNet/IP – Communication profiles describes the
communication profiles used in the communication between
the client, the adapter module and the drive.
• EtherNet/IP – Communication protocol describes the
EtherNet/IP communication protocol for the adapter module.
• EtherNet/IP – Diagnostics explains how to trace faults with the
status LEDs on the adapter module.
PROFINET IO protocol
• PROFINET IO – Start-up presents the steps to take during the
start-up of the drive with the adapter module and gives
examples of configuring the PROFINET master.
• PROFINET IO – Communication profiles describes the
communication profiles used in the communication between
the master, the adapter module and the drive.
• PROFINET IO – Communication protocol describes the
PROFINET IO communication protocol for the adapter module.
• PROFINET IO – Diagnostics explains how to trace faults with
the status LEDs on the adapter module.
To Next Page
Loading...
