ABB FENA-21 - Page 256

256 PROFINET IO – Start-up
29 DRIVE TYPE
CODE
Read-only. Displays the drive type code of the
fieldbus adapter module mapping file stored in
the memory of the drive.
N/A
ACS355:
FILE CONFIG ID
ACSM1:
DRIVE TYPE
CODE
ACS850/ACQ810:
Drive type code
ACS880/ACS580:
FBA A/B drive type
code
Drive type code of the fieldbus adapter module
mapping file
30 MAPPING FILE
VER
Read-only. Displays the fieldbus adapter
module mapping file revision stored in the
memory of the drive in decimal format.
N/A
ACS355:
FILE CONFIG REV
ACSM1:
MAPPING FILE
VER
ACS850/ACQ810:
Mapping file ver
ACS880/ACS580:
FBA A/B mapping
file ver
Mapping file revision
31 D2FBA COMM STA Read-only. Displays the status of the fieldbus
adapter module communication.
Note: The value names may vary by drive.
0 = Idle
OR
4 = Off-
line
ACS355:
FBA STATUS
ACSM1:
D2FBA COMM STA
ACS850/ACQ810:
D2FBA comm sta
ACS880/ACS580:
D2FBA A/B comm
status
0 = Idle Adapter is not configured.
1 = Exec.init Adapter is initializing.
2 = Time out A timeout has occurred in the communication
between the adapter and the drive.
No. Name/Value Description Default