ABB FENA-21 - Page 366

366 Appendix A – PROFIdrive parameters and I&M records of PROFINET IO
929 R Unsigned16 Selected PPO type
Value PPO type
1 PPO1
2 PPO2
3 PPO3
4 PPO4
5 PPO5
6 PPO6
7 PPO7
Note: This parameter is not available if
Standard telegram ST1 or ST2 is
selected.
930 R/W Unsigned16 Selection switch for communication
profile.
Value Mode
1 PROFIdrive
8001h ABB Drives
8002h Transparent 16
8003h Transparent 32
8004h PROFIdrive positioning
mode
933 R/W Unsigned16 Selection switch for Control word, bit
11.
Value Module Control word
bit
0 None
1 to 5 Vendor specific 1 to 5
2)
934 R/W Unsigned16 Selection switch for Control word, bit
12. (See parameter 933 for coding.)
935 R/W Unsigned16 Selection switch for Control word, bit
13. (See parameter 933 for coding.)
Par. no. R/W
1)
Data type Description