ABB FENA-21 - Page 370

370 Appendix A – PROFIdrive parameters and I&M records of PROFINET IO
1000 R/W Unsigned16 Map 16-bit selection
3)
. Used to request
the data type for mapped parameters if
mapping is done with parameter 915 or
916.
Value Description
1 Use 16-bit mapping, if
available.
50000 R/W Unsigned16 Disable alarms.
Value Description
0 PNIO alarms enabled.
1 PNIO alarms disabled.
61000 R VisibleString24 Name of station
61001 R Unsigned32 IP of station
61002 R Array [6]
Unsigned8
MAC of station
61003 R Unsigned32 Default gateway of station
61004 R Unsigned32 Subnet mask of station
1)
Read and/or Write
2)
The meaning of vendor-specific bits is defined by the drive control
program.
3)
Support depends on the drive type.
Par. no. R/W
1)
Data type Description