ABB i-bus KNX User Manual

ABB i-bus
®
KNX
Commissioning
FCA/S 1.x.x.1 | 2CDC508134D0202 183
Distinction between long and short
operation
Options:
No
Yes
Using this parameter, you set if the input differentiates between short and long operation.
 Yes: After opening/closing the contact, it must first of all be ascertained if a short or long operation has
occurred here. Only thereafter will a possible reaction be triggered.
Note
With distinction between long and short operation, two communication objects are visible for each input.
One communication object only transmits during short operation, the other communication object only
during a long operation.
The following table shows the function in detail:
T
L
is the time duration from where a long operation is detected.

ABB i-bus KNX Specifications

General

Brand	ABB
Model	i-bus KNX
Category	Controller
Language	English