6 Reference information
6.7. Special tools
3HAC 026048-001 Revision: -196
© Copyright 2006 ABB. All rights reserved.
Dismounting tool, bearing race, tilthouse shaft
The tool for removing the bearing race from the tilthouse shaft is assembled with the parts
shown in the figure below (included in the toolkit for service).
Note! The parts cannot be ordered separately, but are included in the complete toolkit! The
article numbers are given only for identification.
xx0600002657
C Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
E Nut, 3HAC5507-1
F Sleeve, 3HAC023963-027
G Nut, 3HAC023963-028
H Press sleeve, 3HAC023963-038
I Connection rod, 3HAC025192-006
A Hydraulic cylinder, 3HAC11731-1
B Press washer, 3HAC023963-007
C Hex socket head cap screw, 9ADA183-25, 2 pcs, M6 x 25
D Connection rod, M16, length= 400 mm
E Nut, 3HAC5507-1
G Nut, 3HAC023963-028
M Sleeve, 3HAC023963-037
Continued
Continues on next page
To Next Page
Loading...
