2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 19
The display board provides a VGA monochromatic display to monitor the process and results. It also
provides six magnetic switches to allow a user to navigate through various screens of data and control
the processes (stop operation, start operation, and calibrate). Navigate screens using the display
magnet.
The VGA display features:
VGA display circuit board
Two LED status indicators, user-programmable. The default left LED flashing light indicates a
fault alarm, and a solid light indicates a warning alarm. Right LED solid light indicates device is
not in auto run mode.
User interface, with hall-effect magnet navigation, for monitoring the analyzer’s operation.
To Next Page
Loading...
