ABB NGC8200 - Additional Information; Compliance; Cyber Security; Table 0-1: Related Documentation

2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 7
—
Additional information
Additional free publications are available for download at www.abb.com/analytical.
Table 0-1: Related documentation
Document
Document number
Data sheets
NGC
8206
2101164
PGC1000
2101183
User drawings
NGC8200 Power Option 24 VDC solar power
2104134
NGC8200 Power Option 12 VDC solar power
210413
3
NGC8200 Phoenix
®
24 VDC power supply with UPS
2104132
NGC8200
Small weather enclosure drawing
2104224
Installation of sample, carrier
,
and calibration lines for NGC
2103085
NGC Illustrated parts breakdown
2103336
NGC820
0
to Phoenix
®
power supply
2103149
C
ontrol D
rawings
(CU
-
TR)
Control
Drawing,
NGC/PGC
,
GOST
-
R
2104758
(IECEx)
Control
Drawing,
NGC/PGC
, EX d, Zone 1
2102805
(ATEX) Control Drawing, NGC/PGC, EX d, Zone 1 2102250
(CSA) Control Drawing, NGC/PGC, DIV 1, C/US 2101429
(INMETRO) Control Drawing, NGC/PGC, Ex d 2106190
Other documentation
Technical bulletin - Upgrading NGCs TekBul 220
Modbus Registers for NGC8200 and PGC1000 2108309
Return Material Authorization (RMA) request form 2108308
—
Compliance
Cyber security
This product is designed to be connected, and communicate information and data, via a network
interface. All ABB products should be connected to a secure network. It is the customer's sole
responsibility to provide, and continuously ensure, a secure connection between the product(s) and
the customer network as well as a secured and controlled physical access to the hardware equipment,
or any other network (as the case may be). The customer shall establish and maintain appropriate
measures (such as, but not limited to, the installation of firewalls, the application of authentication
measures, encryption of data, installation of antivirus programs, etc.) to protect the products, the
network, its system and its interfaces against any kind of security breaches, unauthorized access,