2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 67
3. Click Send.
4. If you were trying to complete the wizard return to the Analyze Cal Stream tab.
5. Click Next to Run Analysis streams. Follow steps in section 6.5.8 Run Analysis Process
streams.
6.5.8 Run Analysis Process streams
1. At the Analysis Process Streams tab, select Run on the left side of the screen (Figure 6-33)
to begin the first sample stream in the sequence. The indicator next to Run should turn blue,
the cycle clock begins, and you should see on-screen animation of gas flowing on the sample
stream (Figure 6-34).
Figure 6-33: Run Analysis Sample Streams
To Next Page
Loading...
