2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 33
Figure 4-13: Multiple stream conditioning module dimensions
4.4.5.2 Install the sample conditioning module
Materials:
Single or multiple module mounting kit
One .312 x 2.5 x 3.62 x 1.5 U-bolt
Two 5/16 inch SST split washers
Two 5/16 inch SST flat washers
Two 5/16-18 SST lock nuts
Sample conditioning module(s) and hardware
The two sample conditioning module mounting brackets are installed identically. The single module
bracket holds a single stream sample conditioning module, while the multiple module bracket holds up
to three sample conditioning modules.
Figure 4-14: Sample system mounting kits
To Next Page
Loading...
