92 | NGC8200 AND PGC1000 USER MANUAL | 2101510MNAH
Figure 9-10: Security Editor
3. Click Yes to confirm device change to NGC.
4. Add the Administrator user:
a. Click Add User.
b. Type the user name into the Name field.
c. Type the password into the Password field.
d. Click OK. The Users list shows the administrator name with Basic as the default role. Assign
the correct role in the next step.
Figure 9-11: Type user credentials
5. Click the Role drop-down list next to the user and select Administrator.
To Next Page
Loading...
