96 | NGC8200 AND PGC1000 USER MANUAL | 2101510MNAH
Figure 9-18: Locate saved RBAC file
5. Type the password for the security file:
Figure 9-19: Enter security file password
6. Click OK.
7. Click Send to save the security file on the analyzer.
8. Click OK at the warning.
Figure 9-20: Send Security File warning
9. Click Close to exit the Security Editor. Connection with analyzer will be lost.
10. Restart PCCU32.
11. Click Entry to connect with the analyzer again.
12. Type credentials at the login prompt (Figure 9-21) and then, click OK.
13. Verify that connection is established.
To Next Page
Loading...
