ABB PST210 - Frequency Fault, Type of Operation; Heat Sink Over-Temperature Fault, Type of Operation

Functions
Chapter 10
155
1SFC132003M0201
10:49 Frequency fault, type of operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/Freq F Op
This parameter makes it possible to select between two
different actions of the softstarter if the frequency is out of
range (frequency fault).
Stop–M The motor stops and a manual reset is required
before restart.
Stop–A The motor stops and an automatic reset is
performed when the fault disappears.
10:50 Heat sink over-temperature fault,
type of operation
Path in menu:
Menu/SETTINGS/Functional Settings/
Faults/HS Temp Op
This parameter makes it possible to select between two
different actions if the heat sink temperature of the softstarter
is too high.
Stop–M The motor stops and a manual reset is required
before restart.
Stop–A The motor stops and an automatic reset is
performed when the fault disappears.
Parameter
text
Default value Setting range Description
FB Fault
Op
Stop–M Stop–M, Stop–A Type of opera-
tion for fieldbus
fault
Parameter
text
Default value Setting range Description
Freq F Op Stop–M Stop–M, Stop–A Type of operation
for frequency fault
Parameter
text
Default value Setting range Description
HS Temp
Op
Stop–M Stop–M, Stop–A Type of opera-
tion for heat sink
over temperature
fault