ABB PST210 - Password; Setting Password; Wrong Password

Human-Machine Interface (HMI)
Chapter 6
66
1SFC132003M0201
6:1.3 Password
To lock the keypad from control and change of settings, a
password can be set. When the keypad is locked, all menus
are available but no changes can be done nor any actions
can be taken.
6:1.3.1 Setting password
The password at delivery is always 1.
1. Press the upper navigation key once to enter the parame-
ter Change Password.
2. Select Change Password, figure 11.
3. Set the new password (No or 1...255) using the navigation
keys.
Select Store and Next, figure 12 and figure 13.
Select Back to return to top level.
6:1.3.2 Wrong password
If wrong password is set, the text “Wrong Password” will
show up, figure 14.
A support code will be given, figure 15. The code can be
ignored and an unlimited number of try-outs can be made.
If you are unable to unlock the keypad, note the support code
and contact your local ABB sales office.
Change Password
Select Back
F
igure 11: Change password
New Password 1
Store Back
F
igure 12: New password
New Password 1
Next
F
igure 13: New password stored
Wrong Password
Next
F
igure 14: Wrong password
Support code 1
Next
F
igure 15: Support code