Connection
Chapter 5
58
1SFC132003M0201
5:3.3 Transferring of parameters
To transfer(copy) parameters from one softstarter to another,
connect the keypad to the chosen softstarter and follow the
sequence below.
5:3.3.1 Uploading of parameters
Enter the menu Transfer par. Select To Keypad and confirm
by pressing Select. A text Load to keypad will be displayed.
Continue by pressing Execute and then Yes when the text
Are you sure is displayed. Transfer OK will now be displayed
if the transmission was successful, otherwise Transfer NOT
OK.
5:3.3.2 Downloading of parameters
To download the parameters, connect the keypad to the
chosen softstarter and select To Start er. A text Load to Start
will be displayed. Continue by pressing Execute and then
Yes when the text Are you sure is displayed. Transfer OK will
now be displayed if the transmission was successful,
otherwise Transfer NOT OK. Set the parameter Setting Ie
and confirm by pressing Next.
The parameters in the menu Service Settings will not be
transferred.
How to operate the keypad, see Chapter 6 “Human-Machine
Interface (HMI)”.
1
100-250V
Stop
Start
In0
In1
Vc
AC/DC, 50/60 Hz
2
3
4
5
6
7
8
9
10
Vp
Vp
11
K4
12
13
14
Vn
15
16
K5
17
18
19
K6
20
L
N
Figure 39: Upload
1
100-250V
Stop
Star
t
In
0
In
1
V
c
AC/DC, 50
/60
Hz
2
3
4
5
6
7
8
9
10
V
p
V
p
11
K
4
1
2
1
3
1
4
V
n
1
5
1
6
K
5
17
18
1
9
K
6
20
L
N
Figure 40: Download
To Next Page
Loading...
