GUID-AACFC753-BFB9-47FE-9512-3C4180731A1B V1 EN-US
Figure 38: RJ-45 communication port and green indicator LED
1 RJ-45 connector
2 Green indicator LED
The default IP address for the IED front port is 10.1.150.3 and the corresponding subnetwork
mask is 255.255.254.0. It can be set through the local HMI path Main menu/Configuration/
Communication/Ethernet configuration/FRONT port/AP_FRONT.
Ensure not to change the default IP address of the IED.
Do not connect the IED front port to a LAN. Connect only a single local PC with
PCM600 to the front port. It is only intended for temporary use, such as
commissioning and testing.
Section 5 1MRK 505 370-UEN D
Local HMI
90 Busbar protection REB670
Application manual
To Next Page
Loading...
