ABB REF615 - Page 124

Parameter Values (Range) Unit Step Default Description
Frame3InUse 2 -1=Not in use
0=User frame
1=Standard frame 1
2=Standard frame 2
3=Standard frame 3
4=Standard frame 4
5=Standard frame 5
6=Private frame 6
7=Private frame 7
-1=Not in use Active Class2 Frame 3 for instance
2
Frame4InUse 2 -1=Not in use
0=User frame
1=Standard frame 1
2=Standard frame 2
3=Standard frame 3
4=Standard frame 4
5=Standard frame 5
6=Private frame 6
7=Private frame 7
-1=Not in use Active Class2 Frame 4 for instance
2
Class1OvInd 2 0=No indication
1=Both edges
2=Rising edge
2=Rising edge Overflow Indication for instance 2
Class1OvFType 2 0...255 10 Function Type for Class 1 overflow
indication for instance 2
Class1OvInfNo 2 0...255 255 Information Number for Class 1
overflow indication for instance 2
Class1OvBackOff
2
0...500 500 Backoff Range for Class1 buffer
for instance 2
GI Optimize 2 0=Standard
behaviour
1=Skip spontaneous
2=Only overflown
3=Combined
0=Standard behaviour Optimize GI traffic for instance 2
DR Notification 2 0=Disabled
1=Enabled
0=Disabled Disturbance Recorder
spontaneous indications enabled/
disabled
Internal Overflow 0=False
1=True
0=False Internal Overflow: TRUE-System
level overflow occured (indication
only)
Table 36: IEC 61850-8-1MMS settings
Parameter
Values (Range) Unit Step Default Description
Unit mode 1=Primary
0=Nominal
2=Primary-Nominal
0=Nominal IEC 61850-8-1 unit mode
Section 4 1MRS756378 D
Basic functions
118 REF615
Application Manual