ABB Relion 615 series - Page 60

OR6
O:80|T:2.5|I:23
B1
B2
B3
B4
B5
B6
O
OR6
O:79|T:2.5|I:24
B1
B2
B3
B4
B5
B6
O
OR6
O:81|T:2.5|I:22
B1
B2
B3
B4
B5
B6
O
OR6
O:82|T:2.5|I:21
B1
B2
B3
B4
B5
B6
O
OR6
O:84|T:2.5|I:26
B1
B2
B3
B4
B5
B6
O
OR6
O:85|T:2.5|I:25
B1
B2
B3
B4
B5
B6
O
TPGAPC1
O:86|T:2.5|I:1
IN1
IN2
OUT1
OUT2
OR6
O:83|T:2.5|I:20
B1
B2
B3
B4
B5
B6
O
GENERAL_PICIUP_PULSE
GENERAL_TRIP_PU LSE
PHIPTOC1_50P-3_TRIP
PHLPTOC1_51P-1_TRIP
PHHPTOC1_50P-1_TRIP
PHHPTOC2_50P-2_TRIP
NSPTOC2_46-2_TRIP
EFLPTOC1_51G_TRIP
EFHPTOC1_50G-1_TRIP
EFIPTOC1_50G-3_TR IP
EFLPTOC2_51N-1_TRIP
PDNSPTOC1_46PD_TRIP
ARCSARC1_AFD-1_TRIP
ARCSARC2_AFD-2_TRIP
ARCSARC3_AFD-3_TRIP
NSPTOC1_46-1_TRIP
PHLPTOC1_51P-1_PICKUP
PHHPTOC1_50P-1_PICKUP
PHHPTOC2_50P-2_PICKUP
PHIPTOC1_50P-3_PICKUP
NSPTOC1_46-1_PICKUP
NSPTOC2_46-2_PICKUP
EFLPTOC1_51G_PICKUP
EFLPTOC2_51N-1_PICKUP
EFIPTOC1_50G-3_PICKUP
EFHPTOC1_50G-1_PICKUP
PDNSPTOC1_46PD_PICKUP
GUID-52097E03-6891-45E2-9F24-A031AB0D74CF V1 EN
Figure 25:
The trip signals from the protection functions are connected to the two trip logics
TRPPTRC1_86/94-1 and TRPPTRC2_86/94-2. The output of these trip logic functions
are available at binary outputs X100:PO3 and X100:PO4. Both the trip logic functions are
provided with lockout and latching function, event generation and the trip signal duration
setting. If the lockout operation mode is selected, binary input has been assigned to
RST_LKOUT input of both the trip logic to enable external reset with a push button.
Three other trip logics TRPPTRC3...5_86/94-3…5 are also available if the relay is
ordered with high speed binary outputs options.
Section 3 1MAC109016-MB C
REF615 standard configurations
54 REF615 ANSI
Application Manual