5.3.2.2 Configuring a GOOSE control block with the IEC 61850 Configuration
tool
1. Select the IED in the Plant Structure view.
2. Select the GOOSE Controls tab in the tool pane.
3. To add a new GOOSE control block, right-click the area containing the existing
GOOSE control blocks and select New.
GUID-3C5E7AA0-5A13-4241-A8A7-502D9980F672 V1 EN
Figure 10: Creating a new GOOSE control block
4. Browse to LLN0 under LD0 to define where the GOOSE control block is to be
placed.
5. Give a unique name to the GOOSE control block.
Section 5 1MRS757809 C
GOOSE
30 REC615 and RER615
Engineering Guide
To Next Page
Loading...
