ABB Relion REC615 - Creating an Empty Project with IET600

GUID-014EC1F7-B65A-462E-9785-448AB640CB6A V1 EN
Figure 17: Export options for an SCL file
4. Click Export.
5.4.2 Creating an empty project with IET600
1. Open IET600.
2. To create an empty project, click the round button on the upper-left corner of the
IET600 tool.
3. Click Manage Projects.
4. In the Projects dialog, click New.
5. Name the project.
GUID-3CD5DA7F-A4FC-4D16-8008-5860BF7D01F9 V1 EN
Figure 18: Naming a project
6. To select the destination folder for the project, click Browse.
7. Click OK.
Section 5 1MRS757809 C
GOOSE
38 REC615 and RER615
Engineering Guide