ABB Relion REC615 - Relay Parametrization

7.2 IEC 61850 Configuration tool user interface
1 2 3
5
4
7
6
8
9
10
GUID-611AEE28-1D17-4400-80BD-8E5054C35752 V1 EN
Figure 52: IEC 61850 Configuration tool user interface
1
Engineering mode selection
2 Switch engineering mode on and off
3 Switch IEC 61850 IED naming on and off
4 Create new object
5 Selection details
6 Receiving access points
7 Mapping grid
8 Data to send/receive
9 Engineering type selection
10 Object properties
1. Engineering mode selection
The communication mode can be selected from the drop-down list on the toolbar.
Three modes are available: “GOOSE Communication”, “Client-Server
Communication” and “Process Bus Communication”.
2. Switching engineering mode on and off
The button switches between engineering and view mode. The configuration can
be edited only in the engineering mode.
1MRS757809 C Section 7
Engineering of event reporting with PCM600
REC615 and RER615 85
Engineering Guide