After creating an empty project, import the SCD file from PCM600 to the project.
5.4.3 Importing the SCD file into IET600
1. Import the SCD file from PCM600 to the empty project.
• Click Import SCL File on the shortcut menu of the project object
• Click Import button
GUID-9F2B5FC8-1AA3-4955-999D-7850B89094AC V1 EN
Figure 19: Importing an SCL file
2. Locate the SCL file and click Open.
If the substation includes third-party devices which need to be
configured for horizontal GOOSE communication, the SCL files
holding the information from those devices must be imported as well.
1MRS757809 C Section 5
GOOSE
REC615 and RER615 39
Engineering Guide
To Next Page
Loading...
