ABB REM615 - LD0.PSPTUV1 Positive-Sequence Undervoltage Protection - Stage 1; LD0.PREVPTOC1 Phase Reversal Protection; DR.RDRE1 Disturbance Recorder; LD0.RESCMMXU1 Residual Current Limit Supervision

2.3.1.38 LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1
Table 41: LD0.PSPTUV1 Positive-sequence undervoltage protection - stage 1
IEC 61850 name SA name Description Values
LD0.PSPTUV1
.Op.general OPERATE Stage operate 1=Operate
.Str.general START Stage start 1=Start
2.3.1.39 LD0.PREVPTOC1 Phase reversal protection
Table 42: LD0.PREVPTOC1 Phase reversal protection
IEC 61850 name SA name Description Values
LD0.PREVPTOC1
.Op.general OPERATE Stage operate 1=Operate
.Str.general START Stage start 1=Start
2.3.1.40 DR.RDRE1 Disturbance recorder
Table 43: DR.RDRE1 Disturbance recorder
IEC 61850 name
SA name Description Values
DR.RDRE1
.RcdMade.stVal DR recording made 1=Made
2.3.1.41 LD0.RESCMMXU1 Residual current limit supervision
Table 44: LD0.RESCMMXU1 Residual current limit supervision
IEC 61850 name
SA name Description Values
LD0.RESCMMXU1
.HiAlm.stVal HIGH_ALARM High alarm 1=Alarm
.HiWrn.stVal HIGH_WARN High warning 1=Warning
2.3.1.42 LD0.RESVMMXU1 Residual voltage limit supervision
Table 45: LD0.RESVMMXU1 Residual voltage limit supervision
IEC 61850 name
SA name Description Values
LD0.RESVMMXU1
.HiAlm.stVal HIGH_ALARM High alarm 1=Alarm
.HiWrn.stVal HIGH_WARN High warning 1=Warning
1MRS756880 C Section 2
DNP3 data mappings
REM615 23
Point List Manual