ABB REM615 - LD0.DNPGGIO1 Parameter Setting Group Control; LD0.LLN0;LPHD1 Reset Indications and Leds, Reset Device; LD0.PEMMXU1 Reset Accumulated Energy Values; DR.RDRE1 Disturbance Recorder

2.3.2.5 LD0.DNPGGIO1 Parameter setting group control
Table 65: LD0.DNPGGIO1 Parameter setting group control
IEC 61850 name SA name Description Type
LD0.DNPGGIO1
.ActSG1.ctlVal - Setting group 1 On
.ActSG2.ctlVal - Setting group 2 On
.ActSG3.ctlVal - Setting group 3 On
.ActSG4.ctlVal - Setting group 4 On
.ActSG5.ctlVal - Setting group 5 On
.ActSG6.ctlVal - Setting group 6 On
2.3.2.6 LD0.LLN0/LPHD1 Reset indications and LEDs, reset device
Table 66: LD0.LLN0/LPHD1 Reset indications and LEDs, reset device
IEC 61850 name SA name Description Type
LD0.LLN0
.LEDRs1.Oper.ctlVal - Reset indications and LEDs On
.LEDRs2.Oper.ctlVal - Reset alarm LEDs On
LD0.LPHD1
.RsDev.Oper.ctlVal - Reset device On
2.3.2.7 LD0.PEMMXU1 Reset accumulated energy values
Table 67: LD0.PEMMXU1 Reset accumulated energy values
IEC 61850 name
SA name Description Type
LD0.PEMMXU1
.SupDmdRs.Oper.ctlVal RSTACM Reset accum. energy On
2.3.2.8 DR.RDRE1 Disturbance recorder
Table 68: DR.RDRE1 Disturbance recorder
IEC 61850 name
SA name Description Type
DR.RDRE1
.MemClr.Oper.ctlVal - Clear all records On
.RcdTrg.Oper.ctlVal - Trig recording On
1MRS756880 C Section 2
DNP3 data mappings
REM615 29
Point List Manual