2105552MNAE | RMC-100 | 81
applications, as in Table 5-2. Keep or change those assignments; or use unassigned annunciators to
add other applications.
This procedure assigns one of the unassigned annunciators to one of the measurement applications
instances, AGA3-1.
Assign up to eight annunciators to the applications. An application must be
instantiated before assignment. If there are not enough available annunciators, reassign default
ones, as necessary.
Figure 5-11: Default annunciator assignments
To assign the applications to an annunciator:
1. Click Display on the navigation tree.
2. Click Annunciators. The current annunciator assignments display (Figure 5-12
).
To Next Page
Loading...
