98 | RMC-100| 2105552MNAE
Figure 5-34: RMC-100 Services
2. Select the MQTT Service checkbox. The MQTT REST Service activates.
3. Select the MQTT REST Service checkbox. This allows access to the MQTT configuration interface
from a web browser. Once configuration for MQTT is complete, the REST service can be
disabled for security.
Figure 5-35: Enable MQTT Service and REST Service on the RMC-100
4. Click Send.
5. Refer to the How to Configure MQTT guide for further configuration details. See Additional
information for a link to the document.
To Next Page
Loading...
