39SCU200 INSITE ENERGY MANAGEMENT SYSTEM
5.1.2.Direct LAN connection
For network connection, an access with static address may be necessary in the first step. IP Address:
192.168.1.200:8000 / Subnet Mask: 255.255.255.0
The control unit is set up using a web interface. To connect a PC or laptop to the SCU200 without DHCP,
you need to configure the LAN interface with a static IP address. Using the example of Windows, the
following shows the configuration steps.
Select Control Panel → Network and Sharing Center →
To Next Page
Loading...
