9SCU200 INSITE ENERGY MANAGEMENT SYSTEM
2.System overview
InSite energy management system is a monitoring system which brings complete overview of the
system performances and enables energy and asset management. The system consists of a Control
Unit (SCU200) and different modules easily connected through a mechanical coupling to the control
unit: energy meter module (INS-E3), power supply module (INS-PS-1), Wireless M-Bus module (INS-WM),
USB module (INS-USB) and smart auxiliary and signal module (INS-S/H). The input measurements and
data from meters are transmitted via Modbus RTU, Modbus TCP and Wireless M-Bus communication
protocols. The input measurements and information from current sensors and I/O modules are
transmitted through a flat cable, the InSite bus. All gathered data can be displayed or analyzed via LAN
interface with the integrated web server through Modbus TCP or SNMP protocols and/or via RS485
interface through Modbus RTU.
2.1.Control Unit
RJ45 LAN port
RS-485 (2-wire)
InSite bus interface
SMA connector
(only on SCU200-W)
Connection port to 24 VDC
microSD slot
Reset button
WPS
button
Modular bus connector (input)
FRONT VIEW LATERAL VIEW
TOP VIEW
BOTTOM VIEW
To Next Page
Loading...
