58 SCU200 INSITE ENERGY MANAGEMENT SYSTEM
• Modbus TCP devices
In this section it is possible to add Modbus TCP devices connected to the SCU200.
It is possible to download device descriptor with registers that was configured or upload previously
prepared/configured descriptor.
Add
Device model
Select the predefined device model, if it is not selected it will be
possible to configure registers manually.
IP address Set the IP address of the device.
Modbus ID Set the Modbus ID address of the device.
Name Set the name of the device.
Device category Defines the category of the device.
Port Set the port of the device.
To Next Page
Loading...
