ABB TPS48-H33 - 2 Removing and Installing; Turbocharger Weight and Transportation; Table 2 Weight of the Turbocharger; Table 3 Swivel Lifting Eye (S) to be Used

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
2
Removing and Installing
Page 11 /
99
© Copyright 2016 ABB. All rights reserved.
HZTL4037_EN
Revision A
August 2016
2 Removing and Installing
2.1 Turbocharger weight and transportation
Lifting gear with a sufficient load limit must be used for removing and installing the turbo-
charger. The following weight specification applies to the heaviest variant possible. Depending
on the specification, the weight specified on the rating plate may be lower than the standard
value specified here.
Product
Weights [kg]
TPS44 120
TPS48 180
TPS52 250
Table 2: Weight of the turbocharger
One swivel lifting eye (S) is required to safely lift this turbocharger. This is not included in the
ABB Turbo Systems scope of delivery.
Swivel lifting eye (S) to be used
Product
Thread
Length
L [mm]
Minimum load
limit [kg]
TPS44 M8 13 125
TPS48
M8
13
190
TPS52 M10 18 260
Table 3: Swivel lifting eye (S) to be used
Figure 4: Turbocharger transport