Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
Page 67 /
© Copyright 2016 ABB. All rights reserved.
9.6 Pressing off the casing
Axial force of the press-off tool
Using the press-off tool (90042), a high level of axial force can be generated.
If the casing is pressed off with too much force on one side, the rotor can be
damaged.
Use the tool on both sides in alternation and make sure not to press off
too hard on either side.
Figure 22: Press off the casing
To Next Page
Loading...