ABB Zenith ZBTS T Series - Page 40

40
Zenith ZBTS T-series 100-1200A, INSTALLATION AND OPERATING INSTRUCTION
1
In CONNECTED location
In CONNECTED location, Push button pushed,
Racking in/out tool inserted, ready to start rotation
Push button returns, TEST location reached,
Push button pushed agen, Racking in/out tool
inserted, ready to start rotation
Push button returns, ISOLATED location reached In ISOLATED location, Racking in/out tool
inserted back into storage
—
Fig. 3.28 The use of the Draw-out mechanism to rack out the switch
1
2 3
4 5