Abus HDCC90000 - Configuration; Overview; General Settings

Configuration
25
Configuration
Note
The Configuration menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
ATTENTION:
Subsequent alterations may lead to loss of data.
Ensure data is backed up promptly.
Overview
Menu
Setting
General
Language, video, time, date,
mouse, password, daylight saving
time and other settings.
Network
Required network settings (manual
IP, DHCP, PPPOE, DDNS etc.) and
overview of network status.
RS-232
Settings for the serial interface (for
servicing purposes only).
Alarm
Settings for the alarm I/Os for the IP
cameras.
Live view
Display settings and assignment of
the event output.
Warning
Response of the device in
exceptional cases (hard disk drive
full, network disconnected etc.)
User
Adding and changing users and
assigning access rights.
33
General settings
General tab
Setting
Language
On-screen display language.
CVBS Output
Standard
Video output format at BNC video
output (PAL/NTSC).
Resolution
Monitor resolution
Time Zone
GMT (Greenwich Mean Time).
Date Format
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD.
System Time
Date, time
Mouse Pointer
Speed
Slider (left = low speed,
right = high speed)
Enable Wizard
Box ticked:
The wizard will appear when the
system is started up.
Enable Password
Box not ticked:
A password does not need to be
entered into the recorder itself.
However, the password does need
to be entered if accessing via the
network.
Box ticked:
The password needs to be
entered in order to use the menu.