Need help?Do you have a question about the Abus NVR10030P and is the answer not in the manual?
General| Maximum HDD Capacity | Up to 6TB |
|---|---|
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Hard Drive Support | 1 |
| Channels | 4 |
| Compression | H.264 |
| Network Connectivity | Ethernet |
Provides access to configuration and operating menus.
For selecting cameras and displaying analysis functions.
For selecting camera commands and actions for a specific camera.
For selecting the cameras for playback.
For selecting the specific date of recorded data.
For selecting camera commands and actions during playback.
For controlling and interacting with the playback process.
Search recordings by video or image content.
Search recordings specifically related to people.
Specify criteria for searching people in recordings.
Analyze people entering and leaving based on time period and report type.
Generate heat map images based on date and report type.
Add, delete, and manage camera lists.
View and activate cameras in the network.
Manually add cameras using IP address and protocol.
Connect cameras directly to NVR's PoE ports.
Configure PoE power settings, distance transmission, and status.
Select camera to set display preferences.
Specify cameras to be triggered and recorded during events.
Configure motion detection, tamper monitoring, and video loss.
Configure VCA functions like tripwire, intrusion detection, scene change.
Update the recorder with the latest firmware.
Reset recorder settings to factory defaults.
To Next Page
